Inverto Wide Band LNB

This LNB was developed according to strict specifications and manufactured to the highest quality standards. It allows all programs of a satellite system only two lines in to feed a wide band suitable for single cable converter. This can be over 4 coaxial cable, as so far with a Quattro LNB for a satellite system so far required, 2 satellite systems transmit / feed.
 
£45.00
109018
+

Inverto Wide Band LNB

Inverto broadband LNB IDLP-WDB01-OOPRO-OPP
(Wideband / whole band - for E.g. Jultec a² CSS technology)

 Specially developed to meet providers for low-cost MDU and multi tuner home gateway installations the demand by DTH. This high-quality LNB is based on a single 10.4 GHz oscillator and shows an excellent RF performance over the entire frequency range (L-band) using two outputs (vertical and horizontal) combined with a better Immunity to terrestrial and 4 G interference. Manufactured to the highest standards of industry quality and this LNB is designed to meet strict specifications, an ideal solution for a cost-effective channels from a satellite and distribute to multi-tuner-home gateways or compatible Unicable -EN50494 - or JESS -EN50607 - (SatCR2, SCR2, Unicable II) broadband multi switches (a² CSS technology at Jultec or dCSS).


This LNB was developed according to strict specifications and manufactured to the highest quality standards. It allows all programs of a satellite system only two lines in to feed a wide band suitable for single cable converter. This can be over 4 coaxial cable, as so far with a Quattro LNB for a satellite system so far required, 2 satellite systems transmit / feed.

Main Features:

  • Low Phase Noise, DVB-S2 (HDTV) compliant
  • low power consumption
  • High cross polarization decoupling
  • High frequency stability
  • Better screening against 4 G errors


Specifications:

  • Wideband Input frequency range 10.70 ~ 12.75 GHz
  • Output frequency range 300 ~ 2350 MHz
  • LO frequency @ 25 ° C 10.4 GHz ± 1 MHz
  • LO Temperature Drift (-30 ~ + 60 ° C) 10.4 GHz ± 2 MHz
  • LO phase noise -80dBc / Hz @ 10KHz
  • Noise figure: 1dB (max.)
  • Max.Konversionsgewinn 50dB - 60dB
  • 5dB gain variation (max.)
  • Gain ripple (27 MHz) ± 0.5 dB / 27MHz
  • Cross-Pole 22dB (min.)
  • Image rejection ( 8.05 -10.1 GHz) 40dB (min.)
  • Output VSWR 2.5 : 1 (max.)
  • In-band interference -60dBm (max.)
  • Current consumption 10-10V max. 150mA (max.)
  • Feedhorn up diameter: 55mm
  • Feedhorn up recording diameter 40mm (standard size)


Scope of supply:

  • Inverto Pro Wideband Horizontal / Vertical Ports 40mm LNB